strengthening the materials core of manufacturing enterprises
  • explore

Falling Dart Impact Validation for Abaqus Crash Models

Test ID  

Impact tests based on ASTM D3763 are performed to provide a test bench for validating the high strain-rate material models used in crash/drop test simulations. A hemispherical tipped dart impactor with a mass of 23kg and radius of 6.35mm is used to impact a circumferentially clamped plate with a radius of 38mm. Initial velocity of the dart is 3.35 m/s at the point of impact; the velocity during the event decreases in proportion to the energy absorbed as the impactor penetrates the sheet. The experiment is validated against the target simulation for which the material model has been developed. This validation is currently available for Abaqus *RATE DEPENDENT model (must also order G-712 TestPak).    
The validation can be carried out at other speeds and temperatures than the called out for those covered by the material model and experiment.  
ASTM D3763  
Validated material cards, force v. displacement results for simulation and measured experiments, and simulation files are uploaded to  
Replicates (# of times this test is repeated)  
10 - Ribbed Validation Plaque [details]


The test results in multi-axial stress states allowing us to probe the validity of uniaxial tensile property-based material models for use in more complex real-life scenarios.