strengthening the materials core of manufacturing enterprises
  • explore

C-MOLD Filling/Cooling

Test ID  

Properties needed to perform a C-MOLD injection mold-filling simulation are generated. These include viscosity vs. shear rate data at three temperatures (two in the processing range and one below) and thermal properties. Viscosity data are fit to Cross-WLF model.    
Included Tests  
# Test Id Test Name
1x D-015 Melt Density
3x R-011 Capillary Rheology (1 Temperature)
1x T-015 Specific Heat
1x T-103 Thermal Conductivity Scan
More advanced TestPaks are available to simulate packing, shrinkage and warpage.  
A .fit file and accompanying material property data are provided. You can also create udb files as well as exports for other injection molding CAE using your Matereality CAE Modeler software.  
1 - kg of pellets [details]
According to C-MOLD, you can optimize part thickness while confidently determining gate location(s), weld line location(s), injection pressure and clamp force requirements, eliminating expensive production problems like short shots, flash, and air traps. C-MOLD Cooling simulates how the mold cools over the entire cycle and provides critical information needed to optimize coolant process conditions, mold design and part design. In many cases you can reduce production cycle times by using simulation results to predict the cooling time required for the part to reach the ejection temperature.