strengthening the materials core of manufacturing enterprises
  • explore

Moldflow MF/Stress Anisotropic

Test ID  

Tensile stress-strain curves are generated from tensile bars cut in two directions, flow and cross-flow. The moduli, Poisson's ratio, and yield stress are measured. The in-plane shear modulus G12 is also measured as well as the CLTE in two directions    
Included Tests  
# Test Id Test Name
1x M-017 In-Plane Shear Modulus (Plate Twist Method)
1x M-101 Poissonís Ratio and Tensile Modulus
1x M-102 Poissonís Ratio and Tensile Modulus (2-3 Direction)
1x T-302 Thermal Expansion Coefficient by TMA (Anisotropic)
Measured property data is provided. A ready-to-load data file is provided.  
15 - plaques (4 x 12in) [details]
This TestPak provides all the input data required to run a MF/Stress analysis, after performing a filling and post-filling analysis. This analysis is appropriate for fiber-filled materials. The material is assumed to be symmetric in tension and compression.