strengthening the materials core of manufacturing enterprises
  • explore

Moldflow/C-MOLD Uncorrected Isotropic Shrinkage


Test ID  
G-006

   
Description  
Properties needed to perform a Moldflow injection mold filling, packing, and shrink/warp simulation are generated. These include viscosity vs. shear rate at three temperatures (two in the processing range and one below), thermal properties, PVT data. Additionally, tensile modulus and Poissonís Ratio and thermal expansion coefficient are measured. Data are fit to Moldflow models.    
Included Tests  
# Test Id Test Name
1x D-020 PVT (Isothermal Heating)
1x M-101 Poissonís Ratio and Tensile Modulus
3x R-011 Capillary Rheology (1 Temperature)
1x R-018 No-Flow Temperature
1x T-015 Specific Heat
1x T-103 Thermal Conductivity Scan
1x T-303 Thermal Expansion Coefficient by TMA
 
Data  
Moldflow .udb data files and accompanying material property data are provided. You can also create udb files as well as exports for other injection molding CAE using your Matereality CAE Modeler software.  
Samples  
1 - kg of pellets [details]
10 - tensile bars [details]
   
Application  
A cost-saving alternative to the CRIMS model which may provide acceptable shrinkage estimates for unfilled, amorphous materials. In addition to all the capabilities of post-filling analysis, this TestPak enables calculations of shrinkage and warpage.