strengthening the materials core of manufacturing enterprises
  • explore

Moldflow/C-MOLD Filling + Juncture Losses

Test ID  

Properties needed to perform a Moldflow injection mold-filling simulation incorporating pressure drop in runner and gates are generated. These include Bagley corrected viscosity vs. shear rate at three temperatures (two in the processing range and one below). The entrance pressure loss (Bagley correction) is applied to the viscosity data; the residual contraction pressure loss is correlated to shear stress. Viscosity data are fit to Moldflow models.    
Included Tests  
# Test Id Test Name
1x D-015 Melt Density
3x R-012 Capillary Rheology with Bagley Correction (1 Temperature)
1x R-018 No-Flow Temperature
1x T-015 Specific Heat
1x T-103 Thermal Conductivity Scan
More advanced TestPaks are available to simulate packing, shrinkage and warpage.  
Moldflow .udb data files and accompanying material property data are provided. You can also create udb files as well as exports for other injection molding CAE using your Matereality CAE Modeler software.  
1 - kg of pellets [details]
In addition to all the software capabilities using Filling data, this TestPak enables the juncture loss calculation which permits the simulation of pressure drop across runners and gates due to extensional effects.