strengthening the materials core of manufacturing enterprises
  • explore

Moldflow/C-MOLD Post-Filling

Test ID  

Properties needed to perform a Moldflow injection mold-filling and packing simulation are generated. These include viscosity vs. shear rate data at three temperatures (two in the processing range and one below); thermal properties and PVT data. Data are fit to Moldflow models.    
Included Tests  
# Test Id Test Name
1x D-020 PVT (Isothermal Heating)
3x R-011 Capillary Rheology (1 Temperature)
1x R-018 No-Flow Temperature
1x T-015 Specific Heat
1x T-103 Thermal Conductivity Scan
More advanced TestPaks are available to simulate shrinkage and warpage.  
Moldflow .udb data files and accompanying material property data are provided. You can also create udb files as well as exports for other injection molding CAE using your Matereality CAE Modeler software.  
2 - kg of pellets [details]
1 - parts, any shape [details]
Use this TestPak for properties required to simulate the packing stage, where a hold pressure is applied to the plastic to compensate for material shrinkage. Post-filling simulation may be used to determine how much pack/hold pressure to use, when to decrease the pressure, and how long to apply the pressure prior to gate freeze.