Samples

Hyperelastic test specimens

Supply sheet materials and molded compression buttons. If compression buttons are not available, the compressive test can be carried out by stacking. When testing very thin materials, the compressive test may be replaced by a biaxial tension test which uses thin sheet specimens. In this case, only sheets are adequate for the testing. (If supplying sheets and buttons, 10 sheets and 5 buttons are required. For only sheet specimens, then 15 sheets are required.)

Dimensions:

Sheet specimens
150mm x 150mm area; 3mm thickness
Compression buttons
25mm diameter; 12mm thickness

 


© DatapointLabs 2015