Torsional Crank Validation of Additive Material Models in Abaqus
Test ID
V-171
Description
A truss-like bicycle crank made of additive material (3D printed) is mounted in a special fixture in which one end is rigidly constrained and the other end displaced downwards. The force, displacement, and surface strain (measured with DIC) is recorded and compared to the simulation. This validation is only enabled for the elastic region of the stress strain curve and does not include failure at this point.
Options
This test may be ordered at varying temperatures.
Standards
- ASTM D790
Data
Load v. Displacement. This data appears in Matereality as Flexural Properties.
Replicates
Number of times this test is repeated: 5
Samples
10 Additive crank bar [details]
Application
This test is used to validate the elastic material model of an additive material. This validation does not include plasticity or failure.
