Moldflow MF/Stress Anisotropic
Test ID
G-116
Description
Tensile stress-strain curves are generated from tensile bars cut in two directions, flow and cross-flow. The moduli, Poisson's ratio, and yield stress are measured. The in-plane shear modulus G12 is also measured as well as the CLTE in two directions
Included Tests
| 1x | M-101 | Poisson’s Ratio and Tensile Modulus |
| 1x | M-102 | Poisson’s Ratio and Tensile Modulus (2-3 Direction) |
| 1x | T-302 | Thermal Expansion Coefficient by TMA (Anisotropic) |
| 1x | M-017 | In-Plane Shear Modulus (Plate Twist Method) |
Options
Samples
: 15 plaques (4 x 12in)
[details]Application
This TestPak provides all the input data required to run a MF/Stress analysis, after performing a filling and post-filling analysis. This analysis is appropriate for fiber-filled materials. The material is assumed to be symmetric in tension and compression.
