VISI Flow Shape
Test ID
G-224
Description
Properties needed to perform a VISI Flow injection mold-filling and shape simulation are generated. These include viscosity vs. shear rate at three temperatures (two in the processing range and one below); melt thermal conductivity, specific heat and latent heat if applicable, melt and solid density, a no-flow temperature, and an eject temperature. Thermal diffusivity is calculated. Additionally, tensile modulus vs. temperature, Poisson's Ratio and thermal expansion are measured in parallel and transverse direction.
Included Tests
| 1x | D-020 | PVT (Isothermal Heating) |
| 3x | R-011 | Capillary Rheology (1 Temperature) |
| 1x | M-101 | Poisson’s Ratio and Tensile Modulus |
| 1x | M-102 | Poisson’s Ratio and Tensile Modulus (2-3 Direction) |
| 1x | M-605 | Tensile Modulus vs. Temperature by DMA |
| 1x | R-018 | No-Flow Temperature |
| 1x | T-015 | Specific Heat |
| 1x | T-302 | Thermal Expansion Coefficient by TMA (Anisotropic) |
Options
Samples
: 0.5 kg of pellets
[details]: 12 plaques (4 x 12in)
[details]