SIGMASOFT Thermoplastic: Filled Semi-Crystalline Material
Test ID
G-266
Description
This TestPak generates the properties needed to perform a simulation of the filling, packing, and cooling phases, as well as warpage/shrinkage and post-molding behavior. These include Bagley-corrected viscosity vs. shear rate at three temperatures (two in the processing range and one below); thermal conductivity; specific heat vs. temperature; PVT data taken in the isobaric cooling mode for semi-crystalline materials; and tensile modulus and Poisson's ratio vs. temperatures in two direction as well as shear modulus vs. temperature, and CLTE in two directions. Model fitting for SIGMASOFT is included.
Included Tests
| 1x | SP-105 | Specimen Machining Services |
| 3x | R-012 | Capillary Rheology with Bagley Correction (1 Temperature) |
| 1x | M-102T | SIGMASOFT Mechanical Test (2-3 direction) |
| 1x | T-103 | Thermal Conductivity Scan |
| 1x | T-302 | Thermal Expansion Coefficient by TMA (Anisotropic) |
| 1x | D-021 | PVT (Isobaric) |
| 1x | T-015 | Specific Heat |
| 1x | M-017t | Plate Twist Shear Modulus For 5 Temperatures |
| 1x | D-017 | Drying for Moisture Sensitive Materials |
| 1x | M-101T | SIGMASOFT Mechanical Test |
Options
Filled pellet material must be provided for the rheology, thermal conductivity, and specific heat tests; filled plaques must be supplied for the CLTE, modulus with Poisson's ratio, and PVT tests.
Samples
: 1 kg of pellets
[details]: 20 plaques (4 x 12in)
[details]Application
This TestPak is suitable for fill/pack simulation plus shrinkage and warpage of a filled semi-crystalline material.
