SIGMASOFT MIM
Test ID
G-269
Description
This TestPak generates the properties needed to perform a simulation of the filling, packing, and cooling phases, as well as warpage/shrinkage and viscoelastic post-molding behavior. These include Bagley-corrected viscosity vs. shear rate at three temperatures (two in the processing range and one below); thermal conductivity; specific heat vs. temperature; PVT data taken in the isothermal heating mode; and stress vs. strain at five temperatures, along with modulus, Poisson’s ratio, and CLTE. Model fitting for SIGMASOFT is included.
Included Tests
| 1x | M-101T | SIGMASOFT Mechanical Test |
| 1x | D-020 | PVT (Isothermal Heating) |
| 3x | R-012 | Capillary Rheology with Bagley Correction (1 Temperature) |
| 1x | T-303 | Thermal Expansion Coefficient by TMA |
| 1x | T-015 | Specific Heat |
| 1x | T-103 | Thermal Conductivity Scan |
Options
Samples
: 5 kg of pellets
[details]: 10 tensile bars
[details]Application
This TestPak is intended for Metal Injection Moldingn (MIM) materials. The TestPak generates properties used to simulate everything from filling and packing phases to shrinkage/warpage and viscoelastic behavior.
