Universal TestPak-Rate Dependent Model
Test ID
G-460
Description
This TestPak generates the data required for simulations using LS-DYNA Mat 24 model, ESI PAM-CRASH software, Altair Radioss Law 36 and Abaqus *Rate Dependent model. Tensile experiments are carried out over a range of strain rates ranging into the high-speed impact regime. Tests include three stress-strain measurements in the 0.01-1 /s strain rate range and two high-speed tensile stress-strain curves in the 10-100 /s range, covering a total strain rate range of five decades. Poisson's ratio is provided at 0.01 /s strain rate.
Included Tests
| 1x | D-010 | Solid Density |
| 2x | M-204 | Tensile Stress-Strain, Strength, and Modulus |
| 2x | M-232 | High Speed Tensile Stress-Strain |
| 1x | M-206 | Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio |
| 1x | Z-998 | Data Analysis |
Options
Temperature dependency is available for additional cost.
Failure models can be added to the material models where appropriate.
-Very High Speed Tensile Stress-Strain test [M-235] for strain rates to 1000 /s
Samples
: 30 tensile bars
[details]Application
This data can be used to simulate the behavior of plastic or metal components subjected to impact situations. This TestPak is useful for simulating crash, product drop, impact, etc.
