LS-DYNA High Speed Tensile Rate Dependent Model (MAT_019 or MAT_024 or MAT_089)
Test ID
G-771
Description
Tensile experiments are carried out over a range of strain rates ranging into the high speed impact regime. Tests include three stress-strain measurements in the .01-1 /s strain rate range and two high speed tensile stress-strain curves in the 10-100 /s range covering a total strain rate range of four decades. Poisson's ratio is provided. Data are analyzed for use in the LS-DYNA MAT_019 or MAT_024 or MAT_089 model.
Please note that requesting strain rates that would produce test speeds below 1 mm/min may result in additional charges.
Included Tests
| 1x | D-010 | Solid Density |
| 2x | M-204 | Tensile Stress-Strain, Strength, and Modulus |
| 2x | M-232 | High Speed Tensile Stress-Strain |
| 1x | M-206 | Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio |
| 1x | Z-998 | Data Analysis |
Options
-Very High Speed Tensile Stress-Strain test [M-235] for strain rates to 1000 /s
Samples
: 40 high speed tensile bars
[details]Application
In conjunction with LS-DYNA, this data can be used to simulate the behavior of plastic components subjected to impact situations. The MAT_024 model works best with material showing little or no rate dependency in the modulus. Depending on the observed behavior, DatapointLabs may recommend other material models such as MAT_019.
