Tensile Fatigue S-N Curve of Metals (up to 60 Hz)
Test ID
M-508M
Description
Tensile fatigue tests are performed per ASTM E466 at various stress levels to produce a cyclic stress versus cycles to failure curve (S-N curve). Each stress levels is repeated 3 times to account for variability. The default parameters for this test are 30 Hz, R=0.1 with expected failures from 1000 to 10 million cycles at 23°C with specimen machining and polishing included. Prices vary by the parameters so please call if your parameters differ from these.
Options
This test can be performed as low as -55°C or as high as 1200°C. Frequencies, number of cycles, and stress ratio can be varied.
Standards
- ASTM E466
Data
Cycles to Failure, S-N Curves. This data appears in Matereality as Tensile Fatigue.
Replicates
Number of times this test is repeated: 3
Samples
1 call [details]
Application
An S-N curve is used to predict a materials fatigue life when subjected to repeated loading at various stresses. This property is critical for any application in which there is vibration or repeated motion under load.
