Polycad
Test ID
G-350
Description
Properties needed to perform a Polycad simulation are generated. These include Bagley and Rabinowitsch corrected viscosity vs. shear rate and parallel plate rheological data at three temperatures (two in the processing range and one below), melt thermal conductivity, specific heat v. temperature, melt density at process conditions, solid density, bulk density, melt temperature and heat of fusion.
Included Tests
| 1x | D-010 | Solid Density |
| 1x | D-015 | Melt Density |
| 1x | D-016 | Bulk Density |
| 1x | R-012 | Capillary Rheology with Bagley Correction (1 Temperature) |
| 1x | T-101 | Thermal Conductivity (Melt) |
| 1x | R-022 | DMA Parallel Plate Dynamic Rheology (3 Temperatures) |
| 1x | T-012 | Transition and Eject Temperature |
| 1x | T-015 | Specific Heat |
Options
Samples
: 1 kg of pellets
[details]Application
Profile die design; downstream and laterally spreading flow in coathanger dies for flat film and sheet; flow simulation along the spirals and between the mandrel and the body of spiral dies for blown film and tube production.
