Autodesk Helius PFA
Test ID
G-120
Description
This TestPak supplements an existing Autodesk Simulation Moldflow G-007 TestPak to add elasto-plastic modeling capability for FEA codes. Tensile specimens are cut from the fully developed flow region of a test plaque, in the flow, cross-flow and 45 degree orientations. Tensile stress strain tests are performed to failure, for each orientation. The resulting data are combined with Autodesk Simulation Moldflow data in a reverse-engineering process.
Included Tests
| 1x | M-204 | Tensile Stress-Strain, Strength, and Modulus |
| 1x | M-206 | Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio |
Options
This TestPak can be ordered at different temperatures.
A Moldflow .udb material file is required for the reverse engineering. If this file does not exist, please order [G-007].
Samples
: 15 plaques (4 x 12in)
[details]Application
Fiber-filled injection molded parts have material properties that vary greatly depending on the spatial fiber orientation. This TestPak allows for simulation of non-linear behavior of fiber-filled parts.
